Changes between Version 18 and Version 19 of PublicPages/MayallZbandLegacy/NotesforObservers/Domeflats

Timestamp:

May 8, 2017 4:52:24 PM (8 years ago)

Author:

Rongpu Zhou

Comment:

--

PublicPages/MayallZbandLegacy/NotesforObservers/Domeflats

@@ -56 +56 @@
       }}}
       If this is OK, then you are all ready to go.
- 1. Take 11 zeros:  In the exec directory on mosaic3, type: 
+ 1. Take 11 zeros: in the mosaic3 xterm window, type: 
     {{{
+> cd ~/exec/MzLS/
 > ./ZERO11_MzLS.sh
     }}}
     This takes about 6 minutes to complete
  1. Turn on the dome flat-field lamps: Launch the “Flat-Field Lamp” gui which is on the right side of the left hand screen on mayall-2 Turn on the low-dome flats and turn them up to maximum (100%)
- 1. Take the domeflats: In the exec directory on mosaic3 type:
+ 1. Take the domeflats: In the MzLS directory on mosaic3 type:
     {{{
-> ./DFLATS_zd_MzLS_20sec.sh
+> ./DFLATS_20sec_MzLS.sh
     }}}
     This will take 11 domeflats in about 12 min. The counts should be ~18,000-20,000 adu.  NOTE: On the December run, counts in the standard 15-sec flats were closer to 12k.  The script DFLATS_20sec_MzLS.sh will do 20sec exposure times, yielding the desired number of counts.
  1. When the domeflats are done, turn off the dome flat field lamps. 
- 1. Take 11 zeros: In the exec directory on mosaic3, type: 
+ 1. Take 11 zeros: In the MzLS directory on mosaic3, type: 
     {{{
 > ./ZERO11_MzLS.sh