Changes between Version 15 and Version 16 of PublicPages/MayallZbandLegacy/NotesforObservers/Problems

Timestamp:

Feb 5, 2016 2:12:36 PM (9 years ago)

Author:

David Schlegel

Comment:

--

PublicPages/MayallZbandLegacy/NotesforObservers/Problems

@@ -92 +92 @@
 
 If you lose track of the focus and don’t know whether you are below or above the focus value, wait for the readout countdown to start 
-and then type CTRL-C  in the window executing the script. Wait for the readout to complete and the “DONE” to appear on the NMSL window.
+and then type CTRL-c  in the window executing the script. Wait for the readout to complete and the “DONE” to appear on the NMSL window.
 Then execute
 {{{
-        - ditscmd nohs nohs_endobs
+        ditscmd nohs nohs_endobs
 }}}
 Then do a focus sequence. 
@@ -108 +108 @@
           * Make sure you have chosen the zd filter
         - execute the focus sequence
-        - edit the /data2/observer/mscfoc.cl script to change the file name of the focus image
-        - In the IRAF window, cl < mscfoc.cl and follow the instructions
-        - Once you have determined the best focus: 
+- Edit the /data2/observer/mscfoc.cl script to change the file name of the focus image
+- In the IRAF window, type "mscfoc.cl" and follow the instructions
+- Once you have determined the best focus: 
                 - set the focus value in the MCCD window and hit “Apply”
                 - log the Truss temperature and focus values. 
-        - Edit the observing script to delete all the steps that have been done and start at a new image. Or create a new script
-        - Tell the OA that you have determined a new focus and changed the focus. 
-        - Restart observing
+- Create a new observing script
+- Tell the OA that you have determined a new focus and changed the focus. 
+- Restart observing
 
 === 8. Images of stars on the guider are bouncing around ===