Changes between Version 3 and Version 4 of PublicPages/MayallZbandLegacy/NotesforObservers/Problems


Ignore:
Timestamp:
Feb 5, 2016 12:20:48 AM (9 years ago)
Author:
David Schlegel
Comment:

--

Legend:

Unmodified
Added
Removed
Modified
  • PublicPages/MayallZbandLegacy/NotesforObservers/Problems

    v3 v4  
    33
    44
    5 '''1. Images show bad amp'''
     5=== 1. Images show bad amp ===
    66
    77This is usually diagnosed by an amp appearing “dead”, having very large noise (mscstat results in rms > ~ 1000 adu/pix).
     
    1212Then take two zero images. The first image is always bad. The second should be ok. Check it using  mscstat <filename> once it has read out. All rms values should be between 4-7 adu (except for amps 6 and 14, which may be ~8-10).
    1313
    14 '''2. 4MAPS system goes “OFF AIR” during observing'''
     14=== 2. 4MAPS system goes “OFF AIR” during observing ===
     15
     16[[Image(4MAPS_gui.tiff, 400px)]]
     17
    1518
    1619OA should notice this, but you can keep track of the mirror support system on the 4MAPS gui. If it says “OFF AIR”, the mirror is off air!
     
    2326        - Once the OA has reset 4MAPS, you can restart the script. The telescope will slew to your position and start the exposure.
    2427
    25 '''3. Shifted images'''
     28=== 3. Shifted images ===
    2629
    2730Every now and then, an image appears which shows a shifted region in one or more CCDs. Please log this. You can identify images with shifts by running
     
    3235
    3336
    34 '''4. Repeat images'''
     37=== 4. Repeat images ===
    3538
    3639This is very hard to diagnose, and requires you paying attention to the images, and occasionally running the command:
     
    5558Log all the images that had identical READTIME values.
    5659
    57 '''5. Focus drifting'''
     60=== 5. Focus drifting ===
    5861
    5962If you lose track of the focus and don’t know whether you are below or above the focus value, stop the observing script by using CTRL-C, waiting for the readout to complete and the “DONE” to appear on the NMSL window, and then execute
     
    7275        - Restart observing
    7376
    74 '''6. Images of stars on the guider are bouncing around'''
     77=== 6. Images of stars on the guider are bouncing around ===
    7578        - If the wind is high, ask the OA to close the louvers