Changes between Version 51 and Version 52 of PublicPages/MayallZbandLegacy/NotesforObservers

Timestamp:

Feb 5, 2016 7:53:33 PM (9 years ago)

Author:

David Schlegel

Comment:

--

PublicPages/MayallZbandLegacy/NotesforObservers

@@ -282 +282 @@
 === Please write useful human logs ===
 
-'''THE FOLLOWING NOT YET UPDATED FOR MOSAIC-3'''
-
-Please write about what happened during your night: weather conditions, which pass you observed,
-and telescope problems.  Follow the example on the pages at [wiki:MayallZbandLegacy/ObservingLogs].
+Keep a log about weather conditions, which pass you observed,
+and telescope problems.  Follow the example on the pages at [wiki:MayallZbandLegacy/ObservingLogs] .
 
 Catastrophically bad frames (such as saturated frames, or where the telescope moved) are recorded
-and svn-checked-in to  '''products/mosaic3/logs/bad_expid.txt'''.
+and svn-checked-in to  '''~/products/mosaic3/logs/bad_expid.txt''' .
 
 
@@ -308 +306 @@
 
 1. Ensure that the "Shutter" and "ready" are both in the "Dark" position on the MCCD gui
-2. Press the red "Stop MOSAIC" button on the MOSAIC Menu gui. Wait for this to finish. 
-3. Then press the yellow "Stop Cameras" button on the MOSAIC Menu gui.
-
-If the buttons do now work, then go to one of the NOCS xterm windows and type: 
+2. Press the red "Stop MOSAIC" button on the MOSAIC Menu GUI. Wait for this to finish. 
+3. Then press the yellow "Stop Cameras" button on the MOSAIC Menu GUI.
+
+If the buttons do now work, then go to one of the NOCS xterm windows and type:
+{{{
      nocs stop all (equivalent to pressing the "Stop MOSAIC" button)
+}}}
 Once nocs is shut down, type
+{{{
      nocs stop ccp (equivalent to pressing the "Stop Cameras" button)
+}}}
 Once this is done, type 
+{{{
      nocs status all
      nocs fullstatus ccp
+}}}
 and make sure everything is shut down. Only when this is done, is it safe for the OAs to put on the lights in the dome.