Changes between Version 60 and Version 61 of PublicPages/MayallZbandLegacy/NotesforObservers

Timestamp:

Feb 5, 2016 11:51:28 PM (8 years ago)

Author:

David Schlegel

Comment:

--

PublicPages/MayallZbandLegacy/NotesforObservers

@@ -3 +3 @@
 '''Still need to incorporate the following instructions:'''
   - '''Pointing the telescope, and re-zeroing the pointing using the numbers reported by MOSSTAT or obsbot'''
-  - '''Focus sequence'''
   - '''Running the guiding loop -- although we typically do not guide on the Mayall for these 1-2 min exposures'''
   - '''Coverage plots, which we've not yet ported from the DECam version'''
@@ -207 +206 @@
 1. At start of night, check telescope pointing and zero the telescope coordinates using a bright star placed on the telescope boresight (defined as the center of the mosaic3 focal plane).
 2. Move to the beginning of the first MzLS tile position
-3. Focus the telescope [[BR]]
- 
-{{{
-- create a focus script using the NGUI
+3. Focus the telescope
+ - create a focus script using the NGUI
  - run the focus script from the /home/observer/exec directory 
  - analyze the focus image using mscstarfocus 
@@ -218 +215 @@
  - set the telescope focus  
  - focus the guiders; this way you can use the guider images to monitor focus drifts
-}}}
 
 **[wiki:MayallZbandLegacy/NotesforObservers/FocusInfo Example of a focus sequence]